Feature operation 185Feature operationNetwork Wide Set-based Remote Call ForwardFrom the remote set dial:Step Action1 FCC RCFA code.2 SCPW for the set to be forwarded.3 The complete DN of the set to be forwarded. This DN is the fullDN required to call the set to be forwarded from the user’s presentlocation.Expected Result: Confirmation tone is delivered to the user.From the remote set continue dialing:4 The CFW DN to be activated followed by the end of dial indicator (#).Expected Result: Confirmation tone is delivered to the user.Error Condition: If an error should occur during set-based RCFW,the user is presented with an Overflow tone. To remove the errorcondition, the user must release from the operation and begin again.—End—Attendant-based Remote Call ForwardFrom the attendant console, perform the following:Procedure 1Attendant-based Remote Call ForwardStep Action1 Press an idle loop key followed by the RFW key.Expected Result: The RFW key is flashing and the Loop key issteady lit.2 Dial the DN of the set to be forwarded.Expected Result: If a password is required, the RFW key is winking,and the console display shows "PWD –". If the console does notsupport alpha characters, the display is blank.Nortel Communication Server 1000Features and Services Fundamentals — Book 2 of 6 (C)NN43001-106 02.04 StandardRelease 5.5 9 May 2008Copyright © 1994–2008, Nortel Networks.
