426 China - Flexible Feature CodesSet the Autodial Delay time used by Busy Number Redial.3. "LD 10 - Allow Busy Number Redial for analog (500/2500 type)telephones." (page 426)Allow Busy Number Redial for analog (500/2500 type) telephones.LD 57 - Configure Flexible Feature Codes for Busy Number Redial.Prompt Response DescriptionREQ CHG Change existing data.TYPE FFC Flexible Feature Codes.CUST xx Customer number, as defined in LD 15FFCT (NO) YES Flexible Feature Confirmation Tone.CODE Change code.- DEAF xxxx Deactivate Feature.- BNRA xxxx Busy Number Redial activation code.- BNRD xxxx Busy Number Redial deactivation code.LD 15 - Set the Autodial Delay time used by Busy Number Redial.Prompt Response DescriptionREQ: CHG Change existing data.TYPE: FFC Flexible Feature CodesCUST Customer number0-99 Range for Large System and CS 1000E system.0-31 Range for Small System and Media Gateway 1000B.- ADLD (0)-20 Number of seconds to delay before auto-dialing the savedbusy number (0 will make the feature unavailable). Oddentries are rounded up to the next even number.LD 10 - Allow Busy Number Redial for analog (500/2500 type) telephones.Prompt Response DescriptionREQ: CHG Change existing data.TYPE: 500 Telephone type.TN Terminal numberl s c u Format for Large System and CS 1000E system,where l = loop, s = shelf, c = card, u = unit.c u Format for Small System and Media Gateway 1000B wherec = card and u = unit.Nortel Communication Server 1000Features and Services Fundamentals — Book 2 of 6 (C)NN43001-106 02.04 StandardRelease 5.5 9 May 2008Copyright © 1994–2008, Nortel Networks.
