Feature implementation 4599. "LD 15 - Configure the ANI route table and CAC conversion table."(page 466)Configure the ANI route table and CAC conversion table.10. "LD 16 - Configure the ANI table entry in the Route Data Block forincoming R2MFC route." (page 469)Configure the ANI table entry in the Route Data Block for incomingR2MFC route.11. "LD 16 - Configure the ANI table entry and CAC conversion table forIncoming CIS DTI2 route." (page 469)Configure the ANI table entry and CAC conversion table for IncomingCIS DTI2 route.12. "LD 16 - Configure the ANI table entry for all other route types (ISDN,incoming CIS analog, incoming" (page 470)Configure the ANI table entry for all other route types (ISDN, incomingCIS analog, incoming DTI2 and DPNSS).13. "LD 88 - Configure the CAC for CIS signaling." (page 471)Configure the CAC for CIS signaling.LD 15 - Configure ANI Table for telephonesPrompt Response DescriptionREQ: NEWCHGAdd new data.Change existing dataTYPE: ANI Automatic Number Identification... ... ...ANLD xx...xx ANI listed directory number (for North American trunk)CIS_ANI YES (NO) CIS ANI option.If CIS_ANI=YES, the next sub-prompts is prompted, allowing theconfiguration of ANI entries for CIS ANI message composing.If CIS_ANI=NO, the following sequence of subprompts isskipped.Nortel Communication Server 1000Features and Services Fundamentals — Book 2 of 6 (C)NN43001-106 02.04 StandardRelease 5.5 9 May 2008Copyright © 1994–2008, Nortel Networks.
