Feature implementation 337Configuration procedures require that the following conditions are metbefore you configure Privacy Override Indicators for a Non-ISDN route:• CPPO is configurable on COT, DID, FEX, WAT and ISA routes.• OAPO package 104 is restricted or unequipped.• Route is either OGT (outgoing) or IAO (incoming and outgoing).LD 16 - Configure Privacy Override Indicators for a Non-ISDN route.Prompt Response DescriptionREQ CHG Change existing data.TYPE RDB Route Data Block.CUST xx Customer number, as defined in LD 15ROUT Route number0-511 Range for Large System and CS 1000E system.0-127 Range for Small System and Media Gateway 1000B....CPPYESCalling Party Privacy/Privacy Override (CPP/CPPO) flag.Enable CPP/CPPO feature and configure parameters.(NO) = CPP/CPPO feature is disabled is the default.- TCPP(NO)YESCPP/CPPO flag treatment for an incoming non-ISDN trunk calltandemed to this trunk route.Outgoing call will carry the Privacy Override Indicator (default).Outgoing call will carry the Privacy Indicator.- DTPI (*67) nnnn Digitone Trunk Privacy Indicatornnnn = 0-9999, an asterisk (*) can be entered as the first digit.- DPPI 0-(1167)-9999 Dial-pulse Trunk Privacy Indicator- DTPO (*82) nnnn Digitone Trunk Privacy Indicatornnnn = 0-9999, an asterisk (*) can be entered as the first digit.- DPPO 0-(1182)-9999 Dial-pulse Trunk Privacy IndicatorConfiguration procedures require that the following conditions are met beforeyou set the TCPP flag in RDB to tandem non-ISDN calls on to this route:• The CPP package 301 is equipped.• Route is either OGT (outgoing) or IAO (incoming and outgoing).LD 16 - For an ISDN trunk route, set the TCPP flag in RDB to tandem non-ISDN calls on tothis route.Prompt Response DescriptionREQ CHG Change existing data.TYPE RDB Route Data Block.Nortel Communication Server 1000Features and Services Fundamentals — Book 2 of 6 (C)NN43001-106 02.04 StandardRelease 5.5 9 May 2008Copyright © 1994–2008, Nortel Networks.
