134 Configuring and managing IP interfaces and servicesNN47250-500 (320657-F Version 02.01)Managing Telnet server sessionsUse the following commands to manage Telnet server sessions:show sessions adminclear sessions admin telnet [session-id]These commands display and clear management sessions from a remote client to the WSS’s Telnet server.To display the Telnet server sessions on a WSS, type the following command:WSS# show sessions admin3 admin sessionsTo clear all Telnet server sessions, type the following command:WSS# clear sessions telnetThis will terminate manager sessions, do you wish to continue? (y|n) [n]yCleared telnet session on tty2(To manage Telnet client sessions, see “Logging in to a remote device” (page 146).)Managing HTTPSEnabling HTTPSHTTPS is disabled by default. To enable HTTPS, use the following command:set ip https server {enable | disable}Note. If you type the clear sessions admin telnet command from within a Telnetsession, the session ends as soon as you press Enter.Tty Username Time (s) Typetty0 3644 Consoletty2 tech 6 Telnettty3 sshadmin 381 SSHCaution! If you disable the HTTPS server, Web View access to the switch is alsodisabled.
