364 Configuring quality of serviceNN47250-500 (320657-F Version 02.01)Displaying a CoS-to-DSCP mappingTo display the DSCP value to which a specific CoS value is mapped during marking, use the following command:show qos cos-to-dscp-map cos-valueThe following command displays the DSCP value to which CoS value 6 is mapped:WSS# show qos cos-to-dscp-map 6cos 6 is marked with dscp 48 (tos 0xC0)Displaying the DSCP tableTo display the standard mappings of DSCP, ToS, and precedence values, use the following command:WSS# show qos dscp-tableDSCP TOS precedence tosdec hex dec hex------------ ---------------- -----------------------0 0x00 0 0x00 0 01 0x01 4 0x04 0 22 0x02 8 0x08 0 43 0x03 12 0x0c 0 64 0x04 16 0x10 0 85 0x05 20 0x14 0 106 0x06 24 0x18 0 127 0x07 28 0x1c 0 148 0x08 32 0x20 1 09 0x09 36 0x24 1 2...63 0x3f 252 0xfc 7 14Displaying AP forwarding queue statisticsYou can display statistics for AP forwarding queues, using the following commands:show ap qos-stats [ap-num] [clear]show ap qos-stats [port-list] [clear]The clear option clears the counters after displaying their values.The following command shows statistics for the AP forwarding queues on a Distributed AP:WSS# show ap qos-stats 4CoS Queue Tx TxDrop=======================================AP: 4 radio: 11,2 Background 0 0