276 Configuring APsNN47250-500 (320657-F Version 02.01)vlan-name = orangesession-timeout = 300service-type = 211a beacon rate: 6.0 multicast rate: AUTO11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.011b beacon rate: 2.0 multicast rate: AUTO11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.011g beacon rate: 2.0 multicast rate: AUTO11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command LineReference.)Displaying radio profile informationTo display radio profile information, use the following command:show radio-profile {name | ?}Entering show radio-profile ? displays a list of radio profiles.To display radio profile information for the default radio profile, type the following command:WSS# show radio-profile defaultNo service profiles configured.(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command LineReference.)Displaying AP status informationTo display status information including link state and WSS status, use the following commands:show ap status [terse] | [port-list | all [radio {1 | 2}]]show ap status [terse] | [ap-num | all [radio {1 | 2}]]Beacon Interval: 100 DTIM Interval: 1Max Tx Lifetime: 2000 Max Rx Lifetime: 2000RTS Threshold: 2346 Frag Threshold: 2346Long Preamble: no Tune Channel: yesTune Power: no Tune Channel Interval: 3600Tune Power Interval: 600 Power ramp interval: 60Channel Holddown: 300 Countermeasures: noneActive-Scan: yes RFID enabled: noWMM Powersave: no QoS Mode: wmm