154 Configuring SNMPNN47250-500 (320657-F Version 02.01)Configuring community strings (SNMPv1 and SNMPv2c only)To configure a community string for SNMPv1 or SNMPv2c, use the following command:set snmp community name comm-stringaccess {read-only | read-notify | notify-only | read-write | notify-read-write}The comm-string can be up to 32 alphanumeric characters long, with no spaces. You can configure up to 10community strings.The access level specifies the read-write privileges of the community string:• read-only—An SNMP management application using the string can get (read) object values on theswitch but cannot set (write) them. This is the default.• read-notify—An SNMP management application using the string can get object values on the switch butcannot set them. The switch can use the string to send notifications.• notify-only—The switch can use the string to send notifications.• read-write—An SNMP management application using the string can get and set object values on theswitch.• notify-read-write—An SNMP management application using the string can get and set object values onthe switch. The switch can use the string to send notifications.To clear an SNMP community string, use the following command:clear snmp community name comm-stringThe following command configures community string switchmgr1 with access level notify-read-write:WSS# set snmp community name switchmgr1 notify-read-writesuccess: change accepted.
