Removing the media drive carrier from the chassis 103About the media drive bayMedia drive bays contain media devices, including CD-ROM, tape, andfloppy drives. If your media drives become damaged or you want toupgrade, you can replace these drives. This section provides procedures forreplacing or upgrading any device in the media drive bay.To replace media drivesStep ActionPerform the procedures in the following order to replace media drives:1 "Removing the media drive carrier from the chassis" (page 103)2 "Replacing a tape, CD-ROM or floppy drive" (page 106)—End—Removing the media drive carrier from the chassisWhen replacing the media hard drives, the first step is to remove the mediadrive carrier from the media drive bay.RequirementsTo remove the media drive carrier from the media drive bay, you requirethe following:• keys for the front bezel doors• a Phillips screwdriver• cable identification labels• a pen or pencilLocate the media drivesThe media drives (CD-ROM drive, tape drive, and floppy drive) are shown inthe bottom right corner shown in "Media drives" (page 104).Nortel CallPilot1002rp Server Maintenance and DiagnosticsNN44200-701 01.02 Standard5.0 4 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
