84 Chapter 8 Replacing basic chassis componentsReplacing the SCA SCSI drive cage and fused power cableDue to the potential of an over-current condition, Nortel provides a retrofitSCSI power cable kit for the N0029330 power cable. The kit comprises animproved SCSI power cable, product label, and retrofit procedure.The cable kit part number for all locations, except EMEA, is FR029367. AtEMEA locations, use part number N0029367.• Only qualified field technicians who are familiar with CallPilot and RAIDshould attempt this procedure.• A full-system backup and RAID drive consistency check must beperformed prior to replacing the SCSI power cable. These can both beperformed while the server is online.• If at any step in the procedure, the result is not as indicated, stop andcontact your next level of support for assistance before continuing.To replace the SCSI power cableStep Action1 Log into the CallPilot server.2 Launch the MegaRAID client to check the status of the RAIDsub-system:a. Click Start → Programs → MegaRAID Client.b. Open the Server Selection window.c. Select Access Mode → Full Access and click OK.Result: The MegaRAID Power Console Plus window appears.MegaRAID Power Console PlusNortel CallPilot1002rp Server Maintenance and DiagnosticsNN44200-701 01.02 Standard5.0 4 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
