58 Chapter 6 Using CallPilot Manager to monitor hardwareButton DescriptionATTENTIONIf you are courtesy stopping all components (that is,you are taking the entire system down), ensure thatyou inform all administrators, desktop messagingusers, and web messaging users so that they canlog off their sessions before you proceed.The system asks you to confirm the courtesy stop.If you click OK, the component is put out of serviceafter all calls are finished.Stop Click this button to take the selected component outof service immediately. All calls that are in progressare disconnected immediately.ATTENTIONIf you are stopping all components (that is, you aretaking the entire system down), ensure that youinform all administrators, desktop messaging users,and web messaging users so that they can log offtheir sessions before you proceed.—End—Running integrated diagnosticsRun diagnostic tests from the Diagnostics section on the Maintenancescreen in the following circumstances:• You want to ensure that a component is operating properly afterinstalling or reinstalling it.• The CallPilot server is having trouble processing incoming calls and youare hoping that diagnostic results can tell you why.Problems include static, dropped calls, and cross talk (hearing anotherconversation).Nortel CallPilot1002rp Server Maintenance and DiagnosticsNN44200-701 01.02 Standard5.0 4 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
