Configuration 1554 Select the Feature Programming option to configure the functionsequence that activates the application. See "Programming afeature" (page 163).—End—Configuring the OAI BoxFollow the steps in Procedure 15 "Configure the system type from the OAIBox Configuration option" (page 155) to configure the system type.Procedure 15Configure the system type from the OAI Box Configuration optionStep Action1 From the NetLink OAI System screen, select OAI BoxConfiguration.Note: This option does not appear unless Use NetLink GW withmogX00 is configured to Yes, which is the default.2 Enter the configuration information for the WLAN ApplicationGateway 2246 (provided by the network administrator).• Use NetLink GW with mogX00—change this option to No.• TFTP Download Master—enter the IP address of the TFTPServer.• Maintenance Lock—the system sets this option to Yes aftermaintenance activities are performed that require a reset. Thisoption cannot be changed. It is automatically set. Reset thesystem at exit to clear Maintenance Lock. Maintenance Lockprevents any new calls from starting.• Reset System—if this option is set to Yes, the WLAN ApplicationGateway 2246 is reset after pressing ENTER.• Reset All Systems—not applicable.3 Press Esc on the keyboard to return to the NetLink OAI Systemscreen.—End—Configuring network parametersFollow the steps in Procedure 16 "Configuring the network" (page 156) toconfigure network parameters, including IP address.Nortel Communication Server 1000WLAN IP Telephony Installation and CommissioningNN43001-504 01.02 StandardRelease 5.0 15 June 2007Copyright © 2004-2007, Nortel Networks.
