Continuing configuration through Telnet 1632 At the Telephone Line Configuration screen, select the field to useas the search key (MAC Address, Name, or Extension),3 Press S to display a search screen dialog box.4 Type an appropriate search string.5 Press Enter.The success or failure of the search appears at the bottom of thescreen.6 Continue to change the search string for different search criteriaor exit by pressing the Esc key.—End—The first line of the Telephone Line Configuration or Telephone Line Statusscreen displays the line in which the search match is found.Successful searches always have the first found match at the top of the list.Note: Partial strings match the beginning of strings. For example, asearch for extension 10 matches extensions 10, 100, 1000, and so on,but does not match 010.Feature programmingThe application function is accessed in the handset by pressing the FCNbutton plus a second button. The button used to access the applicationfeature from the wireless handset is configured through the FeatureProgramming option.Note: FCN 1-6 are hard-coded. If the application function isprogrammed to use FCN 1-6, the hard-coded function is overridden.Nortel recommends using 7, 8, or 9 for the application function.Follow the steps in Procedure 22 "Programming a feature" (page 163) toprogram an application feature for the wireless handsets.Procedure 22Programming a featureStep Action1 From the NetLink OAI System screen, select FeatureProgramming and press Enter.2 At the Feature Programming screen , use the arrow keys to selectthe function number 7, 8, or 9 to associate with the application.Nortel Communication Server 1000WLAN IP Telephony Installation and CommissioningNN43001-504 01.02 StandardRelease 5.0 15 June 2007Copyright © 2004-2007, Nortel Networks.
