Nortel NN43001-504 Installation Manual

Also see for Telephony Manager: Supplementary guide Installation and configuration User guide

Contents

Nortel NN43001-504 Installation Manual Manual pdf 172 page image

172 Appendix A WLAN Application Gateway 2246OAIPort MAC Address User NameDialingExt. IP Address (if static)2627282930Free the serial port for administrative purposesIf the serial port is being used as the primary communication link with theApplication Server, you must enter the OAI command to free the serial portto allow it to be used for administrative purposes, such as changing the IPaddress of the WLAN Application Gateway 2246.To free the serial port to allow it to be used for administrative purposes,follow the steps in Procedure 14 "Connecting to the WLAN ApplicationGateway 2246 through a serial port" (page 152).After configuring the WLAN Application Gateway 2246, perform thefollowing steps to again use the serial port as the communication link withthe Application Server.Procedure 28Using the serial port as the Application Server communication linkStep Action1 Disconnect the terminal or PC from the serial port on the WLANApplication Gateway 2246.2 Reconnect the communication cable between the WLAN ApplicationGateway 2246 and the Application Server.3 Reset the system.—End—Normal communication between the Application Server and WLANApplication Gateway 2246 commences.Nortel Communication Server 1000WLAN IP Telephony Installation and CommissioningNN43001-504 01.02 StandardRelease 5.0 15 June 2007Copyright © 2004-2007, Nortel Networks.