Configuring Level 1 Components Standard 3.0100 Nortel TDM RecorderConfiguring alarmsAll alarms that can be triggered in Nortel TDM Recorder are built into theapplication when it ships. System Administrators configure alarms tospecify whether or not the alarm is to be audible, how long to keep the alarmin history, and who is to be notified when the alarm is triggered. For thelatter activity, you configure email servers to facilitate the alarmnotifications. These tasks are described in detail in the Nortel TDMRecorder System Administration Guide.To configure alarms, log in to the Recorder Manager and choose Alarmsthen choose either View Alarms, Notification Profiles, and AlarmSettings, as described in the following table:Alarm Tab DescriptionSection ofSystemAdministrationGuideViewAlarmsAllows you to view all active alarmscurrently triggered as well as alarmhistory, turn off any warning sounds, set aRefresh Rate for the system to pollcomponents to determine if alarmconditions exist, and to view individualalarms by double-clicking.Viewing ActiveAlarmsNotificationProfilesAllows you to view profiles of all personswho will be notified when an alarm istriggered, as well as Create, Edit, andDelete alarm profiles.Reviewing AlarmNotificationProfiles
