September 2007 Configuring Level 1 ComponentsSystem Infrastructure Guide 99Adding a voice cardTo add a voice card you install a new card and let the PC detect it, asdescribed in the following steps:1 Insert a compatible voice card into an empty slot on the bus of therecorder PC.2 Log in to the Recorder Manager and click General Setup > VoiceCards.3 Follow procedures in Adding a New Voice Card in the Nortel TDMRecorder System Administration Guide.4 Refer to Appendix B, Voice Card Configurations, in the Nortel TDMRecorder System Administration Guide for the specific voice card youare creating and to view details about completing its properties.
