Using the CRT-2 for Alter Status $SSHQGL[ ( 7HUPLQDO ,QWHUIDFH 3URWRFROAFP-300/AFP-400 Installation PN 50253:C1 05/22/97 E-78VLQJWKH&57IRU$OWHU6WDWXV2YHUYLHZThis section shows how to do Alter Status functions, Table E-5, from a CRT-2.7DEOH ( $OWHU 6WDWXV )XQFWLRQV$FFHVVLQJ$OWHU6WDWXV2SWLRQVAccess the Alter Status function from the CRT-2 by following these steps.1. Turn on the CRT-2 connected to the control panel.2. Press the Alter Status function key. The control panel displays the Alter Statusmenu options:3. Enter the Status Change Password. The factory default Status Change Password is11111. The password does not display on the CRT-2. Five asterisks will appear inplace of the password:The Alter Status Options menu appears:From the Alter Status Options menu, you can select options 1-5.Function Lets you...Disable Enable or disable detectors, modules, or panel circuits.Alarm/Pre-alarm Change the Alarm and pre-Alarm levels of any addressable detector in thesystem.Clear Verification Clear the verification counter for all the addressable detectors in the system.Clear History Clear the contents of the history buffer.Set Action/Alert Set the pre-Alarm for the Alert or Action.(QWHU 6WDWXV &KDQJH 3DVVZRUG RU (VFDSH WR $ERUWCPress11111Press 'LVDEOH $ODUP3UHDODUP &OHDU 9HULILFDWLRQ &OHDU +LVWRU\ $OHUW$FWLRQwww.PDF-Zoo.com
