Notifier AFP-300 Installation Manual

Also see for AFP-300: Operation manual Manual Programming manual Product installation guide Programming manual

Contents

Peripheral Displays and Printers 6\VWHP 2YHUYLHZAFP-300/AFP-400 Installation PN 50253:C1 05/22/97 1-173HULSKHUDO'LVSOD\VDQG3ULQWHUV2YHUYLHZThe control panel is compatible with the following printers and display devices:• LCD-80 display• PRN-4 printer• Keltron Remote Printer• CRT-2 Display TerminalFor installation instructions for these devices, refer to Section 2./&''LVSOD\The LCD-80 alphanumeric display module is an AFP-300/400 ancillary device thatprovides two modes of operation: Terminal, where it acts as a display repeater; andACS, where it acts as an alphanumeric annunciator. The LCD-80 features thefollowing:• 80-character LCD display that backlights under normal and alarm conditions.• Control switches for Acknowledge, Signal Silence, and System Reset, all madeoperational by an optional AKS-1 switch.• Time/date display field.• Annunciator backbox ABF-1 package with optional AKS-1 key switch and phonejack options.• Remote operation (mounts up to 6,000 feet from the control panel).• Local panel sounder with alarm/trouble resound.3515HPRWH3ULQWHUThe PRN-4 is an optional printer that connects directly to the control panel throughTB1 on the CPU and can be located up to 50 feet from the control panel. It features thefollowing:• Provides a printed record (80 columns of data on standard 9" x 11" tractor-feedpaper) of all system events (alarm, trouble) and status changes within the system.• Time-stamps the printout with the current time-of-day and date..HOWURQ5HPRWH3ULQWHU 0RGHO96The VS4095 is a two-color (red/black), 40-column 24 VDC that can print 50 messagesin 90 seconds. This printer connects to the control panel through TB1 on the CPU andmounts in a separate cabinet next to the control panel. The VS4095 meets UL fire andsecurity requirements for an ancillary device. For more information on the Keltronprinter, contact the manufacturer (Keltron Corp., Waltham, MA). Refer to Section 2 forinstallation instructions.&577HUPLQDOThe optional CRT-2 terminal connects to the control panel via the EIA-485 serialinterface TB2. The CRT-2—can control and view events, points and history reports,control the system (Acknowledge, Alarm Silence, and System Reset). With a CRT-2installed, you can also change important system operating parameters, such as enable/disable of addressable points, change alarm and pre-alarm sensitivities, clearverification counters, clear history, and set the pre-alarm action level. A CRT-2displays 26 lines by 80 columns and can be located up to 50 feet from the control panel.www.PDF-Zoo.com