Introductioncm2520 x-15Explanation of Manual ConventionsBasic Copy Operations Chapter 3Basic Copy Operations 33-313.6 Selecting a Paper SettingThe paper size can be selected automatically according to the documentsize or it can be specified manually. Specify the paper size according to thecorresponding procedure, depending on the desired copy settings.NoteThe default setting is Auto Paper Select .Automatically Selecting the Paper Size ( Au to Paper Select S etting)The size of the loaded document is detected, and copies are produced usingpaper of the same size.1 In the Basic screen, touch [Paper].The Paper screen appears.ReminderBe careful that your fingers are not pinched when the front door is closed.DetailFor details on the positions of paper misfeeds, refer to Paper Misfeed In-dications on page 5-7.CAUTIONMetallic parts on the inside of the upper cover are very hot.Touching any part other than the paper may result inburns.Titles indicate the contents of the section.Touch panel screens are shown tocheck the actual display.NoteText highlighted in this mannercontains references and supplementalinformation concerning operatingprocedures and other descriptions.We recommend that this informationbe read carefully.(The page shown above is an example only.)Text highlighted in this manner indicates precautions to ensure safe use of this machine."Warning" indicates instructions that, when not observed, may result in fatal or critical injuries."Caution" indicates instructions that, when not observed, may result in serious injuries orproperty damage.WARNING , CAUTIONText highlighted in this mannerprovides more detailed informationconcerning operating procedures orreferences to sections containingadditional information. If necessary,refer to the indicated sections.DetailReminderText highlighted in this mannerindicates operation precautions.Carefully read and observe thistype of information.[ ]Names highlighted as shown aboveindicate keys on the control paneland buttons in the touch panel.
