3 Specifying Settings From the Control Panel3-114 cm2520Specifying Settings From the Control Panel Chapter 3PING TX AddressThe host address of the device to ping can be specified.1 In the PING Confirmation screen, touch [Host Address].The Host Address screen appears.2 Touch [IP Address Input] or [Host Name Input].– To specify the host address with the IP address, touch [IP AddressInput].– To specify the host address with the host name, touch [Host NameInput].– If selecting [Host Name Input], check that the DNS settings arespecified correctly before making the selection. For details, refer to“TCP/IP Settings” on page 3-48.3 Enter the host address (IP address or host name (up to 255 charac-ters)).– To edit the values that you entered with “IP Address Input”, touch[←] or [→] to move the cursor to the desired area, touch [Delete],and enter the new value.– To clear all values, press the [C] (clear) key.– If the host address exceeds 81 characters, touch [Details] to displaythe Host Address Detail screen with the rest of the host addresses.4 Touch [OK].The PING TX address is set.
