3 Specifying Settings From the Control Panel3-100 cm2520Specifying Settings From the Control Panel Chapter 33.22 Device SettingsDevice information can be set.Device ParametersThe device parameters are as follows:2 ReminderWhen turning the main power switch OFF then ON, wait for 10 secondsor longer before turning it ON again; otherwise the copier may not func-tion normally.The MAC address of this machine’s network card is displayed under“MAC Address”.To specify device settings1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer topage 3-8 for more details.)2 In the Network Setting screen, touch [9 Detail Setting].3 In the Detail Setting screen, touch [1 Device Setting].The Device Setting screen appears.4 Specify the desired settings.Item DescriptionMac Address Used to verify the machine’s Mac address.Network Speed Sets the network speed.Be sure to turn the main power OFF and then back ON afterchanging the setting.
