Specifying Settings From the Control Panel 3cm2520 3-87Specifying Settings From the Control Panel Chapter 33.19 Search Default SettingYou can specify the LDAP server that is to perform searches by priority fromthe registered LDAP servers.To specify the detect default server settings1 In the Administrator Setting screen, touch [5 Network Setting].2 In the Network Setting screen, touch [7 LDAP Setting].3 In the LDAP Setting screen, touch [3 Search Default Setting].The Detect Default Setting screen appears.4 Select the LDAP server that is to perform searches by priority.5 Touch [OK].2 NoteTo cancel changes to the setting, touch [Cancel].To quit specifying the Utility mode setting, touch [Exit] in the sub displayarea or press the [Utility/Counter] key. Otherwise, cancel the Utility modeby touching [Close] in each screen until the screen for the Copy, Fax,Scan or Box mode appears.
