Specifying Settings From the Control Panel 3cm2520 3-55Specifying Settings From the Control Panel Chapter 33.12 NetWare SettingsThe settings for using the machine on a NetWare network can be specified.NetWare ParametersThe NetWare settings are as follows:NetWare Setting screen 1/5NetWare Setting screen 2/5NetWare Setting screen 3/5NetWare Setting screen 4/5Item DescriptionIPX Setting Specify whether to use IPX.Ethernet Frame Type Sets the frame type that is used for communications.Authentication System When [ON (External Server)] was selected in “UserAuthentication”, specify whether to allow NDSauthentication.Item DescriptionNetWare Print Mode Select the print mode to be used.Status The NetWare status can be verified. For details on specify-ing the setting, refer to “Status” on page 3-59.Item DescriptionPrint Server Name Sets the printer server name. Use the keyboard thatappears in the touch panel to type in the server name (upto 63 characters).Print Server Password Sets the password that is required when the print serverlogs in to the file server. Use the keyboard that appears inthe touch panel to type in the password (up to 63characters).Polling Interval Sets the interval for searching the print queue. To changethe interval, press the [C] (clear) key, and then use thekeypad to type in the value (between 1 and 65535).NDS/Bindery Setting If bindery is disabled, only NDS is enabled. If bindery isenabled, both NDS and bindery are enabled.Item DescriptionFile Server Name Sets the file server name to which the print server logs in.Use the keyboard that appears in the touch panel to type inthe server name (up to 47 characters).
