Specifying Settings From the Control Panel 3cm2520 3-103Specifying Settings From the Control Panel Chapter 32 NoteTo cancel changes to the setting, touch [Cancel].To quit specifying the Utility mode setting, touch [Exit] in the sub displayarea or press the [Utility/Counter] key. Otherwise, cancel the Utility modeby touching [Close] in each screen until the screen for the Copy, Fax,Scan or Box mode appears.NTP Server AddressThe IP address of the NTP server can be specified.1 In the Time Adjustment Setting, touch [Host Address].The Host Address screen appears.2 Touch [IP Address Input] or [Host Name Input].– To specify the host address with the IP address, touch [IP AddressInput].– To specify the host address with the host name, touch [Host NameInput].3 Enter the host address (IP address or host name (up to 255 charac-ters)).– To edit the values that you entered with “IP Address Input”, touch[←] or [→] to move the cursor to the desired area, touch [Delete],and enter the new value.– To clear all values, press the [C] (clear) key.– If the host address exceeds 81 characters, touch [Details] to displaythe Host Address Detail screen with the rest of the host addresses.4 Touch [OK].The NTP server address is set.
