Specifying Settings From the Control Panel 3cm2520 3-139Specifying Settings From the Control Panel Chapter 33.35 External Server AuthenticationIf performing user authentication using an external server, multiple settingsare required depending on the type of server being used. Specify the settingsby using the following procedure as reference.You can specify the external server authentication settings according to thenetwork environment that is to be used.2 NoteIn the future, the operating system may be updated or a new operatingsystem may be released. For details, refer to the manual of the operatingsystem.Using Active DirectoryBefore specifying the settings, prepare the information described below.Administrator password (required)MFP IP address (required)Subnet mask (required)Default gatewayPriority DNS server address (required)Substitute 1 DNS server addressSubstitute 2 DNS server addressDNS default domain nameDNS host nameActive Directory default domain name (required)NTP server (Time Adjustment Setting) addressList of the users for authentication (required)Item Description (reference)Active Directory Specify when using Windows 2000 Server, 2003 Server.NTLM v1 or NTLM v2 Specify when using Windows NT 4.0 Server. NTLM v2 isavailable from Windows NT 4.0 (Service Pack 4).NDS Specify when using NetWare 5.1 or NetWare 6.0.
