3 Specifying Settings From the Control Panel3-102 cm2520Specifying Settings From the Control Panel Chapter 33.23 Time Adjustment SettingsThe machine’s internal clock can be corrected via the network.Time Adjustment ParametersThe time adjustment parameters are as follows:After specifying this setting, touch [1 System Setting] in the AdministratorSetting, touch [3 Date/Time Setting], and then set the date.Periodic automatic adjustment is not performed.To specify time adjustment settings1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer topage 3-8 for more details.)2 In the Network Setting screen, touch [9 Detail Setting].3 In the Detail Setting screen, touch [2 Time Adjustment Setting].The Time Adjustment Setting screen appears.4 Specify the desired settings.5 Touch [OK].The device information is set.Item DescriptionNTP Setting Specify whether to turn on the NTP.NTP Server Address Sets the IP address of the NTP server. For details on spec-ifying the settings, refer to “NTP Server Address” onpage 3-103.Port No. Set the port number used to communicate with the NTPserver. To change the value, press the [C] (clear) key, andthen use the keypad to type in the value (between 1 and65535).
