2 Scanning Documents2-56 cm2520Scanning Documents Chapter 2Original SettingSpecify the type of document that is loaded, for example, if it contains mixedsizes or is a thick document.2 NoteThese functions can be combined.To specify the Original Settings1 Touch [Scan Settings] in the Scan mode screen.2 Touch [Original Setting].Item DescriptionMixed Original Select this setting when documents of different sizes areloaded into the ADF (optional). The scan speed is decreasedsince the size of each page is detected before it is scanned.Thick Original Select this setting when Scanning a thick document.Original Direction Specifies the orientation of the document. The data isprocessed so that the top and bottom ends are correctlypositioned when the document is scanned.Bind Specifies the binding position for punched holes and staples.This function adjusts the binding position so that it is not re-versed when a double-sided document is scanned.Left: A document with a bind on the left side.Top: A document with a bind on the top side.Auto: If the length is 11-3/4 in. or less, the binding position isalong the long side of the paper. If the length is more than11-3/4 in., the binding position is along the short side of thepaper.
