KEY OPERATOR PROGRAMS8-1183 Press the numeric keys to store the faxnumber.Up to 20 digits can be entered.To enter a "+", press the " " key.To enter a hyphen, touch the [PAUSE] key. Toenter a space, touch the [SPACE] key.If you make a mistake, press the [C] key and re-enter the correct digit.4 Touch the [OK] key.You will return to the screen of step 2 and thestored fax number will appear. To store anothernumber, repeat steps 2 through 4.1 Touch the [DELETE] key.The passcode delete screen appears.2 Touch the key of the number you wish todelete.Touch the [YES] key in the message that appears todelete the number. If you touch the [NO] key, you willreturn to the passcode delete screen without deletingthe number.PRINTING OUT SETTINGSSettings established with the key operator programs can be verified by printing them out.1 Press the [CUSTOM SETTINGS] key.2 Touch the [KEY OPERATOR PROGRAMS]key.3 Use the numeric keys to enter the five-digitkey operator code number.For the factory defaultsetting for the keyoperator code number,see page 2 of the keyoperator's guide.4 Touch the [LIST PRINT] key.5 Touch the [KEY OPERATOR PROGRAMSLIST] key.6 Touch the [IMAGE SEND] key."KEY OPERATORPROGRAMS LISTPROCESSING PRINTDATA." appears in themessage screen andprinting begins.To cancel printing, touchthe [CANCEL] key.Deleting a passcodeKEY OPERATOR PROGRAMSSENDER CONTROLLIST PRINTFAX DATARECEIVE/FORWADEFAULTSETTINGSKEY OPERATOR CODENOTES The list is printed before other jobs waiting to be printed. In the screen of step 5, you can touch the [IMAGESENDING ACTIVITY REPORT (FAX)] key to print anactivity report (transmissions and receptions). Printthis list when you wish to check the activity record.(see "Activity report print select setting" on page 8-6)PRINTERSETTINGSKEY OPERATORCODE CHANGECONTROLLIST PRINTNETWORKSETTINGSANTI JUNK FAX NUMBER LISTIMAGE SENDING ACTIVITY REPORT(FAX)KEY OPERATOR PROGRAMS LISTT DOCUMENALL KEY OPERATOR PROGRAMIMAGE SEND
