Oce im4512 Facsimile Operation Manual

Also see for im3511: Programming Date & Time Operation manual Operating manual Operator's guide Operation manual

Contents

Oce im4512 Facsimile Operation Manual Manual pdf 27 page image

1-91STORING, DELETING, AND USING ORIGINAL SIZESUp to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power isturned off. Storing a frequently used original size saves you the trouble of manually setting the size each time youfax that size of document. To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] keyon the screen.STORING OR DELETING AN ORIGINAL SIZE1 Touch the [ORIGINAL] key.2 Touch the key under [SCAN SIZE].3 Touch the [CUSTOM SIZE] key.4 Touch the [STORE/DELETE] key.5 Touch the original size key ( ) thatyou wish to store or delete.To store an original size,touch a key that does notshow a size ( ).Keys that already have anoriginal size stored will showthe stored size ( ).To delete or change astored size, touch the key that shows the size that youwish to delete or change.If you are storing an original size, go to step 6.If you are deleting an original size, go to step 8.If you are changing an original size, go to step 8and touch the [AMEND] key.6 Enter the X (width) and Y (length) dimensionsof the original with the keys.X (width) is initiallyselected.Enter X and then touchthe ( ) key to enter Y.A width of 2-1/2 to 17inch (64 to 432 mm) canbe entered in X, and alength of 2-1/2 to 11-5/8 inch (64 to 297 mm) canbe entered in Y.7 Touch the [OK] key.The original size entered in step 6 is stored in thekey selected in step 5.To exit, touch the [ORIGINAL] key.8 When you touch a key that shows anoriginal size in step 5, a message screenappears that contains the keys [CANCEL],[DELETE], and [AMEND]. To cancel the procedure, touch the [CANCEL] key. To delete the selected original size, touch the[DELETE] key. To change the original size stored in the key, touchthe [AMEND] key. The screen of step 6 will appearto let you change the size.9 To exit, touch the [ORIGINAL] key.USING A STORED ORIGINAL SIZE1 Follow steps 1 to 3 of "STORING ORDELETING AN ORIGINAL SIZE".2 Touch the original size key that you wishto use.3 Touch the [OK] key.The stored original size is called up.AUTO 8 X11ORIGINALSTANDARDRESOLUTION1/2100%SCAN SIZEAUTO 8 X112-SIDEDBOOKLET2-STAB1/2CUSTOMSIZE STANDARD SIMANUAL5 X8 R5 X85R1/2 1/21/2 1/2RECALL STORE/DELETERECALL STORE/DELETEX5 Y101/2 1/8X5 Y101/2 1/8CANCEL OK1711(2 1/2 17)inchRECALLYXAXYSTORE/DELETE(2 1/2 11 5/8)inchRECALL STORE/DELETEX5 Y101/2 1/8