KEY OPERATOR PROGRAMS8-38USING THE KEY OPERATOR PROGRAMSFollow these steps to configure the settings in the key operator programs.1 Press the [CUSTOM SETTINGS] key.2 Touch the [KEY OPERATOR PROGRAMS]key.3 Use the numeric keys to enter the five-digitkey operator code number.For the factory defaultsetting for the keyoperator code number,see page 2 of the keyoperator's guide.4 Touch the [IMAGE SEND SETTINGS] key.5 Touch the [OPERATION SETTINGS] key orthe [FAX SETTINGS] key to display the keyoperator programs.6 Select the desired program and configurethe setting.Page 8-2 shows the programs that can be selected.The settings for each of the programs are explainedon the following pages.7 Press the [CA] key to exit the program. Supplementary explanation of key operation for key operator programsA The name of the program category or particular item to be set will appear on the touch key. The displayed itemis selected by touching the key.B Check mark boxes are touch keys that show the status of selections. A box with a check mark means thefunction is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off statuschanges each time the box is touched.C If the settings continue on the following screen(s), touch the and keys to move back and forth throughthe screens. To return to the category selection screen, touch the [OK] key.D The currently set numerical value is displayed.E Numerical values can be set by touching the and keys.KEY OPERATOR PROGRAMSSENDER CONTROLLIST PRINTFAX DATARECEIVE/FORWADEFAULTSETTINGSKEY OPERATOR CODECOPY SETTINGSDOC. FILINGSETTINGCONTROLDEVICE CONTROLIMAGE SENDSETTINGSCONTROLE SEND SETTINGSOPERATION SETTINGSFAX SETTINGSI-FAX SETTINGS15 (1 15)AKEY OPERATOR PROGRAMSOPERATION SETTINGS1/2INITIAL RESOLUTION SETTINGTHE NUMBER OF FILE NAME/SUBJECT KEYS DISPLAYED SETTINGMUST INPUT NEXT ADDRESSKEY AT BROADCAST SETTINGOKDEFAULT DISPLAY SETTINGS THE NUMBER OF DIRECT ADDRESS/SENDER KEYS DISPLAYED SETTINGB CD E66These keys and indicator areavailable on setting screens thatrequire the entry of numerical values.
