3-113OWN NUMBER SENDINGThis function prints the date, time, your programmed name, your programmed fax number, and the transmitted pagenumber at the top center of each page that you fax. All pages that you fax include this information.Example of fax page printed out by the receiving machine(1) Date and time: The date and time, and the font used to print the date and time, are set in the custom settings(page 2-12 of "Copying operation manual").(2) Own name: programmed with the key operator program. (See "Fax own number and name set" on page 8-5.)(3) Own fax number: programmed with the key operator program (See "Fax own number and name set" on page8-5.).(4) Transmitted page number: 3-digit number appearing in the format, "page number/total pages" (only the pagenumber appears if you use manual transmission or Quick On-Line transmission). If desired, you can use thekey operator program to omit the page number. (See "Printing page number at receiver" on page 8-7.) Position of sender's informationThe key operator program can be used to select whether the sender's information is added outside the originaldata or inside the data. (See "Date/own number print position setting" on page 8-8.) The initial factory setting isoutside the data.OCT/10/2003/FRI 03:00 PM PLANNING DIV. FAX No. 0666211221 P. 001/001(1) (2) (3) (4)Direction of transmission Direction of transmissionLength ofscanned dataLength oftransmitted dataLength ofscanned dataLength oftransmitted dataNone of the transmittedimage is cut off; however,the transmitted data islonger than the scanneddata, and thus when boththe sender and the receiveruse the same size of paper,the printed fax may eitherbe reduced or split up andprinted on two pages.The top edge of thescanned data will be cut offby the sender'sinformation; however,when both the sender andthe receiver use the samesize of paper, the printedfax will neither be reducednor split up and printed ontwo pages.Outside scanned data Inside scanned data
