Using Image Capture (Mac OS X Only)ScanningChanging SettingsThe ICA driver does not support Windows.The ICA driver does not support Mac OS X 10.6.7 or earlier.ScanningMemoThe following procedure uses Image Capture as an example.1. Set a document in the ADF or on the document glass.2. Start Image Capture on the computer.3. Select the machine from the list on the left side of the Image Capture screen.4. Click [Scan].Scanning starts.5. Select [Close Image Capture] from [Image Capture].Changing SettingsYou can adjust how a document is scanned by changing the driver settings.The following explains each setting item.If you display detailed information, you can adjust how a document is scanned in details.1. Set a document in the ADF or on the document glass.2. Start Image Capture on the computer.3. Select the machine from the list on the left side of the Image Capture screen.4. Click [Display the detailed information].5. Change the setting if necessary.6. Click [Scan].Scanning starts.181
