Printing on EnvelopesLoading EnvelopesFor Windows PCL Printer DriverFor Windows XPS Printer DriverFor Windows PS Printer DriverFor Mac OS X PCL Printer DriverFor Mac OS X PS Printer DriverNoteCurling or creasing may occur after printing. Be sure to perform a test print to check that no problems exist.Load envelopes with the address side up in the direction as described below.If you are using envelopes with the flap (for gluing) on the long edge (Monarch, Com-9, Com-10, DL, C5, C6), load them withthe flap folded so that the flap is on the left side when fed.Duplex printing is not available for envelopes.Loading EnvelopesWhen printing on envelopes, change the paper size setting, and use the MP tray and faceup stacker.1. Load envelopes in the MP tray.2. Open the faceup stacker.3. Press [Device Settings] on the touch panel.4. Press [Paper Setup].5. Press [MP Tray].6. Press [Media Type].7. Press [Envelope].8. Press [Back] until the home screen is displayed.Next, set printing settings from a printer driver.TopicsAvailable envelope types.About Paper Sizes, Weight, and Number of Sheets That Can be LoadedThe manual feed mode is available for envelopes.Printing Manually One by OneFor Windows PCL Printer Driver1. Select [Print] from the [File] menu.2. Click [Preferences].3. Select [Envelope*] from [Size] on the [Setup] tab.* Select an envelope type.4. Select [Multipurpose Tray] from [Source].5. Select [Landscape] from [Orientation].6. Change other settings if necessary, and then click [OK].211
