Importing and Exporting Destination E-mail AddressesExporting Addresses to a FileImporting Addresses from a FileWith the User Setting plug-in, you can register and edit the e-mail address of the machine. The following section describes somefunctions.NoteTo use the following functions, install the User Setting plug-in.About how to install the plug-inInstalling Configuration ToolExporting Addresses to a File1. Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].2. Select the machine that has the addresses you want to export from [Registered Device Table].3. Select the [User Setting] tab.4. Click [E-mail Address Manager].5. Enter the administrator password, and then click [OK].The factory default password is "aaaaaa".6. Click (Export to file).7. Enter the name of a file to be saved and the name of the save destination folder, and then click [Save].NoteAfter exporting, the edited CSV file may not restore properly.Importing Addresses from a File1. Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].2. Select the machine to which you want to import the addresses from [Registered Device Table].3. Select the [User Setting] tab.4. Click [E-mail Address Manager].5. Enter the administrator password, and then click [OK].The factory default password is "aaaaaa".6. Click (Import from file).7. Click [Open] from [Select CSV File].8. Select the file to import, and then click [Open].9. Click [Next].10. Select the settings to import, and then click [Import].11. Click (Save to device).Memo734
