Setting Sleep ModeWhen a set period of time elapses, this machine enters Sleep mode from Power Save mode. In Sleep mode, the status of this machineis almost the same as when this machine is turned off.In Sleep mode, the (POWER SAVE) button flashes.You can register Sleep mode in the following three ways.NoteIf an error has occurred, the machine does not enter Sleep mode.If a delayed transmission is reserved, the machine does not enter Sleep mode.If a fax transmission is waiting for a redial, the machine does not enter Sleep mode.If the wired network connection is switched to the wireless network connection, the machine does not enter Deep Sleep mode butenters Sleep mode.If the wireless network connection is switched to the wired network connection, the machine enters Deep Sleep mode.Exiting Sleep Mode or Deep Sleep Mode to Standby ModeTo exit Sleep mode to standby status, press the (POWER SAVE) button.MemoWhen this machine receives data from a computer or other devices, this machine returns to standby status.Opening the Web Page of This Machine from a ComputerThis section describes how to set Sleep mode from the Web page. You must enter the administrator password to set this setting.Using Configuration Tool (Windows Only)This section describes how to set Sleep mode from Configuration Tool. You must enter the administrator password to set this setting.Using the Operator PanelThis section describes how to set Sleep mode from the operator panel of this machine. You must enter the administrator password toset this setting.525
