Unpacking and Installing the MachineThis section describes how to unpack and install the machine.Injury may result.Lift this machine by two or more persons, because it weighs approximately 29 kg.NoteUse extra care when handling the image drum (the green cylinder), because it is fragile.Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under room lighting, donot leave the image drum for 5 minutes or more.Packaging and cushioning material is required for transporting the machine. Do not dispose of it, and keep it for future use.For details on paper feed to the machine, refer to "Loading Paper".1. Remove the machine from the box, and then remove cushioning material and the plastic bag from themachine.A set of accessories is packed within the cushioning material.2. Lift the machine, and then place it where it is to be installed.NoteDo not open the scanner unit until step 10.3. Remove the protection tape (1) at the side of the machine, and then take the cushioning material (2)out.867
