Saving TonerFor Windows PCL Printer DriverFor Windows XPS/PS Printer DriverFor Mac OS X PCL Printer DriverFor Mac OS X PS Printer DriverPrinting is possible with less toner.The amount of toner can be saved in three levels.[Printer setting]: Conforms to the printer setting.[Off]: Prints at a normal density without saving toner.[Save Level Low]: Prints at a somewhat lower density level.[Save Level Middle]: Prints at a low density.[Save Level High]: Prints at a very low density.NoteIf using this function, only [Normal (600x600)] or [Fast (600x600)] can be specified as the print quality.MemoThe density of the image that is printed with this function may vary depending on the printed document.For Windows PCL Printer Driver1. Select [Print] from the [File] menu.2. Click [Preferences].3. Select the [Setup] tab.4. Select the amount of toner to save from [Toner saving].5. Change other settings if necessary, and then click [OK].6. Click [Print] on the [Print] screen.Printing starts.For Windows XPS/PS Printer Driver1. Select [Print] from the [File] menu.2. Click [Preferences].3. Select the [Job Options] tab.4. Select the amount of toner to save from [Toner Saving].5. Change other settings if necessary, and then click [OK].6. Click [Print] on the [Print] screen.Printing starts.For Mac OS X PCL Printer Driver1. Select [Print] from the [File] menu.2. Select [Job Options] from the panel menu.257
