Error Messages- 140 -Checking the Machine's Status From the KeyFrom the <STATUS> key on the operator panel, you can check the status of your machine.Checking the Trouble StatusThe <STATUS> key blinks or lights up when any trouble is occurring in your machine. Press it to checkthe trouble status.1 Press the <STATUS> key on theoperator panel to open the status menu.2 Be sure that [System Status] isselected and then press .3 Press the to select the item you wantto check and then press .Checking the Device and Job StatusYou can check the device status, such as the residual life of the consumable items, and job lists from the<STATUS> key.1 Press the <STATUS> key on theoperator panel to open the status menu.2 Press the to select [DeviceInformation] and then press .3 Press the to select the item you wantto check and then press .Access limitation errorMonochrome printing was performedDue to the color printing limitation.Please see Help for details.to closeBlinks A color print job sent by a user who is notauthorized for color printing is printed inmonochrome.Access limitation errorData was deleted dueto the color printing limitation.Please see Help for details.to closeBlinks A color print job sent by a user who is notauthorized for color printing is deleted.Access limitation errorData was deleted dueto the printing limitation.Please see Help for details.to closeBlinks A print job sent by a user who is not authorizedfor printing is deleted.Warming Up. Lights up The machine is warming up, or cooling down.Wait for a while without turning off the machine.This is not a malfunction of the machine.Preparing. Lights up The printer unit is not prepared for printing.Wait until this message disappears.Errorcode Message key Cause/RemedyOKOKOKOKOKOKOK
