Connecting to a Computer- 34 -9 Click [Finish] to complete theinstallation.- To set a default printer, select the check box of thedriver you want.- If the optional second unit is installed in themachine prior to driver installation, click on[Driver properties] and change the set tray.Note If the dialog box prompting to restart the computerappears, click [Yes]. The computer automaticallyrestarts.Reference For how to configure the tray settings by the driver,refer to "Printer Driver Configuration" P. 22.10 Click [Start] > [Devices and Printers].11 Check that the OKI MC561 icon isdisplayed.Right-click the OKI MC561 icon and select one ofthe menu item, and then check that all the printerdrivers installed are displayed in the submenu.12 Remove the "Software CD-ROM" fromthe computer.The installation is complete.Installing a Printer Driver(For Mac OS X)To complete the network connection with a Macoperating system, install a printer driver on thecomputer and set your machine as a networkprinter.Select the protocol for your network connectionfrom the following: EtherTalk Bonjour (Rendezvous for Mac OS X 10.3)Note EtherTalk is not supported in Mac OS X 10.6. Disable the anti-virus software before starting thisprocedure. Using EtherTalk (For Mac OS X10.5)When connecting to the network with EtherTalk,it is necessary to enable EtherTalk and disablethe sleep mode in the machine. Then, install thedriver in the computer. First, enable EtherTalk in the machine.1 Ensure that your machine and thecomputer are turned on and connected.Reference "Connecting an Ethernet Cable" P. 312 Press the <SETTING> key on theoperator panel.3 Press the to select [Admin Setup],and press .4 Enter the administrator password.The factory default password is "aaaaaa".5 Select [Complete], and press .6 Press the to select [Network Menu],and press .7 Press the to select [Network Setup],and press .8 Press the to select [EtherTalk], andpress .9 Press the to select [Enable], andpress .10 Press the until the top screen isdisplayed. Next, disable the sleep mode in the machine.1 Press the <SETTING> key on theoperator panel.2 Press the to select [Admin Setup],and press .3 Enter the administrator password.The factory default password is "aaaaaa".4 Select [Complete], and press .OKOKOKOKOKOKOKOK
