Connecting to a Computer- 31 -Setup1Network ConnectionDo the following procedure to connect yourmachine to a computer via network.Connecting an Ethernet CableBe sure to connect your machine to a networkwith an Ethernet cable before driver installation.1 Prepare an Ethernet cable and a hub.Prepare an Ethernet cable (category 5, twistedpair, straight) and a hub separately.2 Turn off your machine and a computer.Reference "Turning Off Your Machine" P. 193 Remove the side cover on the right sideof the machine while pressing the lockbutton (1).4 Plug one end of the Ethernet cable intothe network interface connection (2) onthe back of the machine.5 Hook the Ethernet cable on the hook (3)of the machine.6 Attach the side cover.7 Plug the other end of the Ethernet cableinto the hub.123
