Other Troubles- 159 -Troubleshooting7When the Power Goes OutMachine BehaviorWhen the power goes out, the machine behaves in the following way:Note We do not warrant operation when an uninterruptible power system (UPS) or inverter is used.Stored Fax Data Backing Up Data in MemoryEven if the power goes out or you turn off the machine, the data for fax transmissions and receivedfaxes is retained for 72 hours as long as it is stored in memory. Erased ReportThe machine automatically prints out an erased report if the fax data in the memory is lost. The reportshows what data is lost by listing the following information: F Code Box Document Documents Received at Alternate RecipientsThe deletion notification will inform you of the next item after the deleted data. Document type F-code box number F-code box name Destination name F-code Confidential communication/F-code bulletin board communication Time communication started Received number of pagesMemo The communication type is printed when it was manual reception, F-code polling, F-code secure reception or F-code bulletinboard reception.Machine's Status BehaviorDuring a call You can continue talking.During transmitting a fax The communication stops.When the electricity supply is restored, The machine automatically starts transmitting the fax whose transmission stoppedand the subsequent data if it was a memory transmission. The machine does not transmit the data if it was a real time transmission. Set thedocument and specify the destination again to start transmission.Receiving a fax The transmission stops in the middle of the operation.When the electricity supply is restored, the machine automatically prints out the datasuccessfully received and stored in memory.Copying or printing a list The printing process stops in the middle of the operation.When the power is restored, start the job again.Idle You cannot start another copy, fax, scan, or print job.You also cannot receive another fax.
