Other Troubles- 142 -Network Connection Problems Common to Windows and Mac OS X For WindowsUSB Connection Problems Common to Windows and Mac OS X For WindowsCause Remedy ReferenceUsing a crossover cable. Use a straight cable. -The machine is turned on before a cablewas connected.Connect cables before turning on the machine. P.31The hub and the machine are incompatibleor have some problem.Press the <SETTING> key and select [Admin Setup] >[Network Menu] > [Network Setup] > [HUB LinkSetting], and then select [10BASE-T HALF].-Cause Remedy ReferenceIP address is incorrect. Check that the same IP address is set for the machineand the machine's port setting on the computer. If using LPR Utility, check the IP address setting in LPRUtility.P.45Cause Remedy ReferenceUnsupported USB cable is being used. Use a USB2.0 cable. -An USB hub is being used. Directly connect the machine to the computer. P.40Printer driver is not installed correctly. Reinstall printer driver. P.40Cause Remedy ReferenceThe machine is off line. Right-click the OKI MC561 icon and then select [Seeprint jobs] (> [OKI MC561(*)] when multiple driversare installed). In the dialog box, select the [Printer]menu and then clear the check of [Use Printer Offline].* Select the type of driver you want.-A switch, buffer, extension cable or USBhub is being used.Directly connect the machine to the computer. P.40A printer driver which uses a USBconnection has been installed.Remove the other printer driver from the computer. -
