MPS930b User’s Guide> 118NO POWERCANNOT PRINTSTATUS ITEMS TO CHECK ACTIONThere is no power. Is the power switched off? Press the printer switch to the position to turn thepower on.Is the power corddisconnected or notsecurely connected?Switch off the power andconnect the cord to the poweroutlet and printer again.Then, switch on the power.Is the power cordconnected to a power outletwith the correct voltage?Connect the printerexclusively to an outlet with asuitable voltage rating andcurrent rating.Power is interruptedfrequently.Printer may havemalfunctioned.Switch off the power to theprinter, remove the plug fromthe power outlet and contactTechnical Support.Is the power corddisconnected or notsecurely connected?Switch off the power andconnect the cord to the poweroutlet and printer again.Then, switch on the power.STATUS ITEMS TO CHECK ACTIONPrint instruction was sentbut processing did notstart.Is the fault indicator lit?Is the print-readyindicator off?Carry out the actionaccording to the status ofthe indicator.Is there any messagedisplayed on the controlpanel?Check the message, thencarry out the action.Is there any messagedisplayed in thecomputer?Check the message, thencarry out the action.