Oki MPS930b User Manual

Also see for MPS930b: Handy reference Material safety data sheet

Contents

MPS930b User’s Guide> 85the above IP address is entered, the Port Name will default toIP_172.168.1.31.9. Click [Next]. [Additional Port Information Required]displayed.10. Under [Device Type], select [Custom] then [Settings].11. Ensure [Protocol] is set to [LPR].12. Ensure [Queue Name] is lp and [SNMP Status Enabled] isdeselected.13. Click [OK].14. Follow on screen instructions to finish installing the printer.Port 91001. Select [Start].[Settings].[Control Panel].[Printers and OtherHardware].2. Select [Printers and Faxes].3. Click [Add Printer] and then click [Next].4. Select [Local printer attached to this computer], clear the[Automatically detect and install my Plug and Play printer]check box, and then click [Next].5. Select [Create a New Port] and select [Type Standard TCP/IPPort].6. Click [Next].7. [Welcome to the Add Standard TCP/IP Printer Port Wizard]appears.8. Click [Next] and provide the following information. Enter[Printer name or IP address], for example: 172.168.1.31. Ifthe above IP address is entered, the Port Name will default toIP_172.168.1.31.9. Click [Next]. [Additional Port Information Required] isdisplayed.10. Under [Device Type], select [Custom] then [Settings].11. Ensure [Protocol] is set to [Raw].12. Ensure [Port Number] is 9100 and [SNMP Status Enabled] isdeselected.