Oki MPS930b User Manual

Also see for MPS930b: Handy reference Material safety data sheet

Contents

MPS930b User’s Guide> 32USING THE HOLE PUNCHERThe optional Finisher contains the Hole Puncher. When installed, a3-hole or 2/4-hole puncher is available. European finishers have the2/4 hole punch while American finishers have a 3 hole punch. Whenhole punching is installed, it must be enabled to punch holes. Whenthe printer detects that the punch waste box is full, a warningappears on the Operator Panel. Printing will continue, but punchingwill not.The most convenient way to enable this feature is by using yourPrinter Properties. You may also enable this feature at the OperatorPanel or by using the EWS.To turn hole punching on through your Printer Properties:1. Select the Paper Feed button in the Setup tab within yourPrinter Properties.The Paper Feed Options window appears.2. Select the desired Hole Punch type from the Hole Punchpulldown.3. Click OK.4. Click OK.EMPTYING THE PUNCH WASTE BASKETSee “Jam Area Locations” on page 146 for a decsription of doorlocations.1. Open Door G.2. Remove the Punch Waste Box and empty the contents.