MPS930b User’s Guide> 1453. Pinch the hooks at each end of the Transfer Roller and lift toremove the Transfer Roller from the chute.4. Grasp the new Transfer Roller by the hooks.5. Carefully insert the new Transfer Roller into its mounting andreseat the hooks.6. Close the door.7. Turn the printer power on.8. Run sample prints to verify correct operation.MAINTENANCE KITA Maintenance kit is required every 300,000 pages. It consists of:• Fuser Unit• Transfer Roller• Paper Feed RollersContact your service department to install the kit when the panelrequests it.
