MPS930b User’s Guide> 287. Click OK.8. Click OK.9. Click OK.TRAY SETTINGSYou can configure a variety of settings for your input trays andoutput bins. The default settings for your source input tray andoutput bin are configured through the Operator Panel’s Paper menu,Default Source and Output Tray selections.SOURCEYou can select the input tray from which paper is used to print thejob.The most convenient way to enable this feature is by using yourPrinter Properties. You may also enable this feature at the OperatorPanel or by using the EWS.To select the paper source through your Printer Properties:1. Select the desired Source from the Source pulldown in theSetup Tab of your Printer Properties.NOTE> If there are no paper trays that match the automatic trayselection, an error message prompting for replenishmentof paper will be displayed.2. Click OK.OUTPUT DESTINATIONYou can choose the output bin where your print job will be placed.The most convenient way to enable this feature is by using yourPrinter Properties. You may also enable this feature at the OperatorPanel or by using the EWS.To select the paper destination through your Printer Properties:1. Select the desired Destination from the Destination pulldownin the Setup Tab of your Printer Properties.2. Click OK.