MPS930b User’s Guide> 92-n No. of copiesThis option specifies the number of copies. If one "lp" command isissued to print multiple files, the number of copies specified by thisoption will apply to all the files.However, this option is effective when the printer is in the spoolmode. In the non-spool mode, the client must be a Windows NTmachine to use this option.Precautions• Among options not listed above (e.g. -m option), those notprocessed by the workstation which sends the printinstructions will not be effective.In the spool mode, up to 32 files can be printed by one "lp"command. Files that come after the 32nd files will be ignored.SampleTo print a file named "file1" to a printer set up as "P001", enter thefollowing command:%lp -d P001 file1To output three copies of "file1" and "file2" to "P001", enter thefollowing:$lp -d P001 -n3 file1 file2Delete (Cancel)This cancel command is used to delete print data which has beensent to print.Command Formatcancel [Printer name] [Job Number]COMMAND OPTIONSThe following command options are available: