Oki MPS930b User Manual

Also see for MPS930b: Handy reference Material safety data sheet

Contents

MPS930b User’s Guide> 21BINDING PREFERENCESYou can select how the printer will orient the page layout whenduplexing. Depending on your page orientation, duplexing on thelong-edge or short-edge of the paper produces different results. Thediagram below illustrates these results.PRINTING ON SPECIAL MEDIAThe printer can accommodate a variety of special media. Each mediatype requires some special handling. Read the sections below foreach special media type, prior to inserting the media into the tray.The most convenient way to enable this feature is by using yourPrinter Properties. You may also enable this feature at the OperatorPanel or by using the EWS.To select the special media types through your Printer Properties:1. Select the desired Media Type from the Media Type pulldownin the Setup Tab of your Printer Properties.2. Click OK.SETTING MEDIA TYPESSettings on the Operator Panel and in your Printer Properties arerequired for media loaded in all trays trays. Media type settings mustmatch those of the actual paper loaded in the trays. Otherwise,image quality cannot be processed accurately. Toner may not fuseproperly on the media, resulting in dirty and poor quality printouts.TRANSPARENCIESTransparencies can be printed from any tray. They should only beprinted on one side.Before printing transparencies:PortraitLong-edgePortraitShort-edgeLandscapeShort-edgeLandscapeLong-edge