MPS930b User’s Guide> 27CUSTOM SIZE PAPERYou can print custom size from Trays 1 through 5. Tray 6 only printsstandard paper. The following paper size ranges can be printed fromeach tray:NOTE> When loading custom size paper in the trays load by thecorrect edge (long or short) and to adjust the paperguides as necessary. See “Loading Paper” on page 11 forinstructions on loading paper into each tray.The most convenient way to enable this feature is by using yourPrinter Properties. You may also enable this feature at the OperatorPanel or by using the EWS.To load and print custom paper:1. Load the media in the desired tray.2. Change media type at Operator Panel via that tray’s MediaMenu option.3. Select the Paper Feed button in the Setup tab within yourPrinter Properties.The Paper Feed Options window appears.4. Select Custom Size.5. Enter the paper parameters and name.6. Click Add.INPUT TRAY OUTPUT TRAY5 1-4 STANDARD STACKERUPPERSTACKERLOWERWidth 89 - 297mm(3.5 -11.70 in.)140 - 297mm(5.5 -11.70 in.)89 - 297 mm(3.5 - 11.70in.)203 - 297mm(7.9 - 11.70in.)203 - 297mm(7.9 - 11.70in.)Height 98 - 432mm(3.87 - 17in.)182 - 297mm(7.16 -11.70 in.)98 - 432 mm(3.87 - 17.0in.)182 - 432mm(7.16 - 17.0in.)182 - 432mm(7.16 - 17.0in.)